LC-CG
Cable Clamping Glands
(Available in Nickel Plated Brass (B) only. A lock nut is supplied with this fitting)

CONSTRUCTION
The fitting consists of a nickel-plated brass multi part compression fitting with an external male thread. The seal is constructed from modified rubber. Protection degree is IP65.
LC-SPS
Space Saver Fittings
(Available in Zinc Die Cast and Nickel Plated Brass (B) only)

CONSTRUCTION
Space Saver multi part compression fitting with a nylon seal. complete with a female threaded body component and a male threaded bush insert.
This fitting minimises the amount of space taken up inside enclosures.
LC-SS
316 Grade Stainless Steel Straight Fittings
(Available in Zinc Die Cast, Nickel Plated Brass (B) and 316 Stainless Steel.
Please note:
It is critical that Liquidtight fittings are correctly assembled and the back nut is tightened to or exceeds the torque tension specified in the Product Data Sheet.
All LC-SS products are supplied with a zinc plated steel ferrule. When the fitting is correctly installed and the back nut is tightened to the torque tension specified in the data sheet, the zinc plated ferrule supports the maximum level of protection.
If the fitting’s back nut is not tightened to the torque tension specified, water ingress can occur resulting in corrosion of the internal ferrule.
In harsh and highly corrosive environments the purchase of an optional 316 grade stainless steel ferrule is recommended. However, water ingress will continue to occur if the back nut is not correctly tightened.
To ensure the maximum level of IP protection is achieved and water ingress is prevented, it is important that the back nut is tightened to the tension specified in the product's technical data sheet.

CONSTRUCTION
External Male Thread Straight. Multi part 316 grade stainless steel compression fitting with a nylon seal and a zinc plated steel ferrule
LC-45-SS
45 Degree Stainless Steel Angle Fittings
(Available in Zinc Die Cast, Nickel Plated Brass (B) and 316 Stainless Steel)
Please note:
It is critical that Liquidtight fittings are correctly assembled and the back nut is tightened to or exceeds the torque tension specified in the Product Data Sheet.
All LC-SS products are supplied with a zinc plated steel ferrule. When the fitting is correctly installed and the back nut is tightened to the torque tension specified in the data sheet, the zinc plated ferrule supports the maximum level of protection.
If the fitting’s back nut is not tightened to the torque tension specified, water ingress can occur resulting in corrosion of the internal ferrule.
In harsh and highly corrosive environments the purchase of an optional 316 grade stainless steel ferrule is recommended. However, water ingress will continue to occur if the back nut is not correctly tightened.
To ensure the maximum level of IP protection is achieved and water ingress is prevented, it is important that the back nut is tightened to the tension specified in the product's technical data sheet.

CONSTRUCTION
External Male Thread 45 degree bend. Multi part compression fitting with a
nylon seal
LC-90-SS
90 Degree Stainless Steel Angle Fittings
(Available in Zinc Die Cast, Nickel Plated Brass (B) and
Stainless Steel)
Please note:
It is critical that Liquidtight fittings are correctly assembled and the back nut is tightened to or exceeds the torque tension specified in the Product Data Sheet.
All LC-SS products are supplied with a zinc plated steel ferrule. When the fitting is correctly installed and the back nut is tightened to the torque tension specified in the data sheet, the zinc plated ferrule supports the maximum level of protection.
If the fitting’s back nut is not tightened to the torque tension specified, water ingress can occur resulting in corrosion of the internal ferrule.
In harsh and highly corrosive environments the purchase of an optional 316 grade stainless steel ferrule is recommended. However, water ingress will continue to occur if the back nut is not correctly tightened.
To ensure the maximum level of IP protection is achieved and water ingress is prevented, it is important that the back nut is tightened to the tension specified in the product's technical data sheet.

CONSTRUCTION
External male thread 90 degree bend
Multi part compression fitting with a nylon seal
LC-FH-SS
Female Hub Straight Fittings (Stainless Steel)
(Also available in Zinc Die Cast and Nickel Plated Brass (B))
Please note:
It is critical that Liquidtight fittings are correctly assembled and the back nut is tightened to or exceeds the torque tension specified in the Product Data Sheet.
All LC-SS products are supplied with a zinc plated steel ferrule. When the fitting is correctly installed and the back nut is tightened to the torque tension specified in the data sheet, the zinc plated ferrule supports the maximum level of protection.
If the fitting’s back nut is not tightened to the torque tension specified, water ingress can occur resulting in corrosion of the internal ferrule.
In harsh and highly corrosive environments the purchase of an optional 316 grade stainless steel ferrule is recommended. However, water ingress will continue to occur if the back nut is not correctly tightened.
To ensure the maximum level of IP protection is achieved and water ingress is prevented, it is important that the back nut is tightened to the tension specified in the product's technical data sheet.

CONSTRUCTION
Internal Thread Female Hub fitting
Multi part compression fitting with a nylon seal
LT-FL
Ferrules (Turned Lip - Flared)
(Available in electro-galvanised (zinc plated) steel, bare brass and 316 stainless steel)
CONSTRUCTION
Conduit ferrules protect cables from damage caused from sharp conduit edges.
Turned lip flared ferrules are available in electro-galvanised (zinc plated) steel, bare brass and 316 stainless steel.
LT-FLSS
316 Stainless Steel Ferrules (Turned Lip - Flared)
(Also available in electro galvanised steel and bare brass)
CONSTRUCTION
Conduit ferrules protect cables from damage caused from sharp conduit edges.
Turned lip flared ferrules are available in electro-galvanised (zinc plated) steel, bare brass and 316 stainless steel.

VJCF-B-SW
VJCF Straight Swivel Non-Compression Fittings (IP54)
(For terminating VJC conduit. Available in Nickel Plated Brass (B) only)

CONSTRUCTION
Two part brass nickel plated straight fitting
with a swivel external male thread. Can be installed into a threaded entry or a knockout and secured by a lock nut.